Loader-crane integrators researching a Scanreco radio remote joystick retrofit usually start from Hydraulic Master or Anderson kit pages — RC400 G2B six-function layouts for Fassi, Hiab, and Palfinger valves without solenoids [Source: hydraulic-master.com Scanreco RC400 kit]. Trunsin supplies cab joysticks and F-series radio lines; valve-side actuation remains integrator scope.
Pair with radio remote crane pairing and electro-hydraulic retrofit.
Scanreco radio remote joystick retrofit — scope table
| Component | Typical vendor | Trunsin offer |
|---|---|---|
| Portable transmitter | Scanreco / compatible | F24/F25 evaluation |
| Cab master stick | OEM multi-axis | AT16 |
| Valve actuation | MOD10 cross-rods | Integrator |
| Neutral interlock | Dual-path enable | Engineering review |
Commissioning notes
Match wired stick neutral to radio transmitter before load tests — mismatched deadband causes hoist creep. Document centering tests for both paths.
Frequently asked questions
Does Trunsin ship Scanreco branded remotes?
Trunsin F-series — compatibility reviewed on RFQ.
Can ZS40 CAN replace cab stick on CAN crane?
Yes when ECU map is documented — CANopen integration.
Timeline vs full valve replacement?
Retrofit kits often shorten downtime — see hydraulic vs electronic.
Port crane overlap?
Different duty — port crane controller.
Related articles
- Crane application guide
- Multi-axis checklist
- Hydraulic vs electronic
- Overhead crane replacement
- Industrial joystick hub
- Configurator
Request Scanreco-class retrofit RFQ
- Crane brand/model + valve type photo
- Existing radio model if present
- Configure AT16 + F-series